Korg Initialize Procedure / Procédure d'initialisation Korg
Parfois une machine crashe, se bloque, ne répond plus. Angoisse. Voici la liste de la procédure de REINITIALISATION pour a peu près tous les produits Korg. Ceci permet de redémarrer la machine, mais attention, toutes vos données personnelles seront aussi perdues : pensez à faire des back-up réguliers !
Sometimes a machine crashes. it does not start anymore, or stay stunked. Panic. Here is the listing of the reinitialize process for all Korg products. This will allows you to make it running again, but be advised that every personnal data will be lost! Make backups of your files on a regular basis !
Print this page for future reference ! imprimez cette page pour plus tard !
Keyboards and Modules
Rom#
SQ8 2.2
DSS1 36
SQD8 3.0
Poly 800 M2 006 on chip
DFP1 803 on chip
SQD1 609 on chip
--------------------------------------------------------------------------------------------------------------------
DDD-1
Initialize
Powerup holding YES and NO / allumez en tenant appuyés Yes et No
--------------------------------------------------------------------------------------------------------------------
DS-8 / 707
Factory Data / Données d'usine
From RAM card of SYSEX (Atari Factory disk) / de la carte RAM de SYSEX ( disquette d'usine Atari)
Initialize
Hold Up and Down ad powerup / allumez en tenant appuyés Up etDown
ROM# :DS-8= #218, 707= #905
Hold 3 and 4 and powerup / allumez en tenant appuyés 3 et 4
--------------------------------------------------------------------------------------------------------------------
M1 (CR2032 Battery)
Factory Data
No ROM load
From card
Initialize
Hold INT and Card and Combi and powerup / allumez en tenant appuyés INT et Card et Combi
ROM# :29
Hold INT and powerup /allumez en tenant appuyé INT
--------------------------------------------------------------------------------------------------------------------
M1R
Factory Data
No ROM load
Initialize
Hold INT and Combi and Prog and powerup /allumez en tenant appuyés INT et Combi et Prog
ROM# :17
Hold Int and powerup / allumez en tenant appuyé INT
--------------------------------------------------------------------------------------------------------------------
M3R
Factory Data
Page 5D of Global mode / Page 5D du mode Global
ROM# :16
Hold Edit and Global and powerup / allumez en tenant appuyé Edit et Global
Battery: CR20322(no solder)
--------------------------------------------------------------------------------------------------------------------
T Series
Factory Data / Données d'usine
Load from Factory disk / depuis la disquette d'usine fournie
Initialize
Hold 0 of lower keypad and Prog A and power-up then Immediately Turn Off
Allumer en tenant appuyés le zéro (0) du keypad le plus bas et Prog A et ré-éteignez immédiatement
ROM# :T-Series 28
Hold 0 of lower keypad and powerup /Allumer en tenant appuyés le zéro (0) du keypad le plus bas
--------------------------------------------------------------------------------------------------------------------
Wavestation / EX / AD
Most recent ROM
Wavestation 3.19
Wavestation EX 3.19
Wavestation A/D 1.25
Factory Data
From RAM card or SYSEX (Atari factory disk) / de la carte RAM de SYSEX ( disquette d'usine Atari)
INITIALIZE:
1. Power Up / While KORG is flashing, Hold 4 & 'V' continuously until the 'Special Screen' appears. / Allumez : pendant que KORG clignote, tenir appuyés 4 et V sans arret jusqu'a ce que l'ecran "Special Screen" apparaisse
2. Press INIT RAM / appuyez INIT RAM
3. Press CONT / appuyez CONT
(RAM is initialized and ROM is loaded into both RAM 1 & 2)
(la RAM est initialisée et la ROM chargée en RAM 1 ET 2)
IMPORTANT: DO NOT PRESS ANY OTHER COMMANDS
IMPORTANT N APPUYEZ SUR AUCUNE AUTRE TOUCHE-COMMANDE
ROM #: 3.19 (AD: #1.25)
1. Power Up / While KORG is flashing, Hold 4 & 'V' continuously until the 'Special Screen' appears./ / Allumez : pendant que KORG clignote, tenir appuyés 4 et V sans arret jusqu'a ce que l'ecran "Special Screen" apparaisse
2. Press CONT (IMPORTANT: DO NOT PRESS ANY OTHER COMMANDS) / appuyez sur CONT
IMPORTANT: do not press any other commands / MPORTANT N APPUYEZ SUR AUCUNE AUTRE TOUCHE-COMMANDE
--------------------------------------------------------------------------------------------------------------------
Wavestation SR
Factory Data
No ROM load
ROM# :1.15
Hold Cursor/Bank/Edit/Yes while unit is powered on / allumez en tenant appuyés Cursor/Bank/Edit/Yes
January 18/93: #1.15
-----------------------------------------------------------------------------------------------------------------------
01/W & 01/Wfd
FACTORY DATA:
Page 7 of GLOBAL Mode. / page 7 du mode Global
INITIALIZE
Hold RESET & COMPARE and Power Up / allumez en tenant appuyés RESET & COMPARE
ROM #: 64
Hold: RESET / Power Up / allumez en tenant appuyé RESET
--------------------------------------------------------------------------------------------------------------------
03R/W
FACTORY DATA:
Page 05C of GLOBAL mode. / page 05C du mode Global
ROM #:13
Hold: +1 and -1 and TURN ON / allumez en tenant appuyés +1 et -1
Feb 7/93: #13
--------------------------------------------------------------------------------------------------------------------
X-3 & X-3R
FACTORY DATA: données d'usine
Load from Factory disk./ chargez avec la disquette d'usine fournie
INITIALIZE
Hold: ENTER & Cursor DOWN and TURN ON / allumez en tenant appuyés ENTER & Cursor DOWN
ROM #:44 (X-2: #46)
Hold: 7 & ENTER / Power Up / allumez en tenant appuyés ENTER et 7
--------------------------------------------------------------------------------------------------------------------
X5/X5D/X5DR/O5RW
Init: Hold "+1" and "-1" while turning on. Once unit is on, let go. / allumez en tenant appuyés +1 et -1
Preload: Perform preload on global screen 5. / sons d'usine sur l'écran Global page 5
--------------------------------------------------------------------------------------------------------------------
N364/N264
Check ROM: Hold "Enter and 7" while powering on.
Init: Hold "Enter and 7" while powering on.
Preload: Load preload disk "NFD-00P"
Testmode-ENTER-8
--------------------------------------------------------------------------------------------------------------------
N1/N5/N5EX/N1r
Check ROM: Hold "Enter" and "1" while powering on.
Init: None
Preload: Press "Utility", Select "Factory Preload" and press
"Enter" twice.
--------------------------------------------------------------------------------------------------------------------
NS5R/NX5r
Check ROM: Hold "Part <" and "Param <" while powering on.
Init: None
Preload: Press "Enter", select "Utility". Then press "Enter" twice more.
Select "Factory Preset" and press "Enter". Select "yes" and Press "Enter" once more.
--------------------------------------------------------------------------------------------------------------------
Trinity
Check ROM: Turn on, look at screen (o.s. 3.1.2 all models, 2.4.1 for Solo)
Init: Hold "Enter" and "0" while powering on.
Preload: Load preload disk "TFD-00P"
--------------------------------------------------------------------------------------------------------------------
TR-Rack
Check ROM: Hold "Edit" and ">" while powering on, o.s 1.0.4
Init: Hold "Edit" and "A4" while powering on.
Preload: Global mode screen 10
--------------------------------------------------------------------------------------------------------------------
Prophecy
Check ROM: Hold "Wheel 3" button while powering on.
Init: None
Preload: Shut off protects on Global screen 20, Preload "All_Data" on Global screen 19
--------------------------------------------------------------------------------------------------------------------
Z1/Z1EX
Check ROM: Hold Enter and 8 while powering on.
Init: Hold SW1 and SW2 while powering on.
Preload: Enter Global Mode, Screen: "Global Data Utility".
Select "Factory" and press Enter twice"
--------------------------------------------------------------------------------------------------------------------
SG-ProX
Check ROM: Hold "Program" and "Piano 1" while powering on.
Init: Hold "Program" and "Piano 1" while powering on.
Preload: Turn off protects for program and performance in Global mode screens 12 and 13, then perform preload on Global mode screen 14.
(Service Note: if problem symptom is Damper pedal controld Modulation Wheel fucntion…reason is mod wheel harness came unpluged from PCB)
--------------------------------------------------------------------------------------------------------------------
SG-Rack
Check ROM: Hold "Edit" and "A4" while powering on.
Init: Hold "Edit" and "A4" while powering on.
Preload: Turn off protects for program and performance in Global mode screen 6, then perform preload on Global mode screen 7
--------------------------------------------------------------------------------------------------------------------
Triton, Triton Rack and Karma
Check O.S On Screen
Init: Enter and 0 while powering up
Preload: On disk supplied
O.S Triton 2.1.0, Triton Rack 1.1.0, Karma 1.0.2
--------------------------------------------------------------------------------------------------------------------
MS2000(R)
Check O.S. Power on while holding 5 and Mod Sequence ON/OFF
Current o.s. 1.0.5
Load O.S PC installer program, need MIDI interface and cables.
Turn on MS2000 while holding WRITE and TYPE
PreLoad In Global
--------------------------------------------------------------------------------------------------------------------
i-Series
I-1
FACTORY DATA
Load from Factory disk.
INITIALIZE
Hold: PROGRAM & DISK and TURN ON
ROM VERSION: Hold EDIT STYLE and Power UP
Check ROM: Hold "Arr. Play" and "Global" powering on.
Init: Hold "Arr. Play" and "Global" powering on.
Preload: Load preload disk "IFD-01P"
--------------------------------------------------------------------------------------------------------------------
I-2 & I-3
FACTORY DATA:
Load from Factory disk.
INITIALIZE:
Hold: ARR PLAY and EDIT STYLE and TURN ON
ROM #:25 (#58 with upgrade)
Hold: EDIT STYLE & EDIT PROGRAM and TURN ON
Product: iX300, i2, i3
Check ROM: Hold "Arr. Play" and "Global" powering on.
Init: Hold "Arr. Play" and "Global" powering on.
Preload: Load preload disk "IFD-00P"
--------------------------------------------------------------------------------------------------------------------
i4s
Check ROM: Hold "Arr. Play" and "Program" powering on.
Init: Hold "Arr. Play" and "Program" powering on.
Preload: Load preload disk "IFD-00P"
--------------------------------------------------------------------------------------------------------------------
i5S/I5M
Check ROM: Hold "Arr. Play" and "Global" while powering on.
Init: Hold "Arr. Play" and "Global" while powering on.
Preload: Load preload disk "IFD-00P"
--------------------------------------------------------------------------------------------------------------------
i30
Check ROM: Turn on, look at top left side of screen (If version is 1.0
no number will appear.)
Init: Hold "Arrange Play" and "Global" while powering on.
Preload: Load preload disk "i30FD-00P"
--------------------------------------------------------------------------------------------------------------------
iS40/50/i40M
Check ROM: Hold "Arr. Play" and "Global" powering on.
Init: Hold "Arr. Play" and "Global" powering on.
Preload: Load preload disk "FDD-1004"
--------------------------------------------------------------------------------------------------------------------
Pa80
Check O.S On start-up screen, currently version 2.0
Preload Go to Disk Mode, Utilities, Restore Data. Make preload data from five files available from the Pa80 site.
--------------------------------------------------------------------------------------------------------------------
IH
Initialize
POWERUP W/ Detune & Bass
--------------------------------------------------------------------------------------------------------------------
C-Series
C-505
INITIALIZE
MIDI/TRANSPOSE & SPLIT and RESTART UNIT
--------------------------------------------------------------------------------------------------------------------
Effect Processors
A1
Factory Data
ROM card included in original packaging
Initialize
Hold Write and -1 and powerup
ROM# :A1 #18 on chip or 901718
Hold Write and powerup
--------------------------------------------------------------------------------------------------------------------
A3 / A2
Factory Data
Initialize
1. Hold Down arrow and Up arrow and powerup
2. Press "E" (Yes)
ROM#: A3=881012,A2=90316
1. Hold Utility and Up arrow and A and powerup
2. While screen displays "How do you do?" press F
3. Press A to change M/R to M/S
4. Press D to change D/R to D/S
5. Press F (Exit)
6. Press Utility then F (Version No. shown very briefly
7. Press F (Exit)
--------------------------------------------------------------------------------------------------------------------
A-4
INITIALIZE
Hold "WRITE" & "BYPASS" and Power On
--------------------------------------------------------------------------------------------------------------------
PX1
Check ROM: None
Init: None
Preload: Hold down "Metronome" and "Enter" buttons while powering on, then let go and press "+" button.
--------------------------------------------------------------------------------------------------------------------
PX2
Check ROM: None
Init: None
Preload: Hold down "Rhythm" and "Enter" buttons while powering on, then let go and press "+" button.
--------------------------------------------------------------------------------------------------------------------
AX1G/B
Check ROM: None
Init: None
Preload: Hold down "Value +" and "Page >" buttons while powering on, then let go and press "Value +" again.
--------------------------------------------------------------------------------------------------------------------
AX30B/G, AX300B/G
Check ROM: None
Init: None
Preload: Hold "Param/Value" and "Compare/Write" while powering on, then let go and press "Compare/Write" again.
--------------------------------------------------------------------------------------------------------------------
G1/2/3/4/5
Check ROM: None
Init: None
Preload: Hold down the Bank Pedal and "Compare/Write" buttons
while powering up, then let go and press "Compare/Write" again.
--------------------------------------------------------------------------------------------------------------------
411FX, 104DS, 105OD, 301DL
Check ROM: None
Init: None
Preload: Hold down the Program button while powering up, then
Let go and press again.
--------------------------------------------------------------------------------------------------------------------
DL8000-R
Check ROM: Hold "ms/d" and "HOLD" while powering up.
Init: Hold "ms/d" and "HOLD" while powering up.
Preload: Hold "ms/d" and "HOLD" while powering up. Wait
for "EEP Testing" to come up on the screen, then shut unit off and power back on.
--------------------------------------------------------------------------------------------------------------------
AM8000-R
Check ROM: Hold "FX1" and "FX2" while powering up.
Init: Hold "FX1" and "FX2" while powering up.
Preload: Hold "FX1" and "FX2" while powering up. Wait
for "EEP Testing" to come up on the screen, then shut unit off and power back on.
--------------------------------------------------------------------------------------------------------------------
Digital Recording Devices
D8
Check ROM: Hold "Metronome" and "Record Select" button # "6" while powering on the unit.
Init: None
Preload: None
--------------------------------------------------------------------------------------------------------------------
168RC
INITIALIZE:
Left knob under screen and + and -
--------------------------------------------------------------------------------------------------------------------
D12/D16/D1600
Check O.S On Start-up Screen
O.S. update Loaded from external media, go to system, choose external drive letter, choose option load system
O.S. D16 2.0.1, D1600
--------------------------------------------------------------------------------------------------------------------
Dance Tools
KAOSS PAD
INIT
HOLD + FX ON/OFF + 3 + POWER ON
After "L" is indicated, press 1->3->5->1->3->5 in order
--------------------------------------------------------------------------------------------------------------------
Electribe A & R
How to start and operate the test mode
+TAP+PowerON Start the test mode
ITEM UP
ITEM DOWN
16 STEP UP
15 STEP DOWN
How to reset the system
TRANSPOSE+WRITE & PLAY EA-1 PRELOAD
SOLO+WRITE & PLAY ER-1 PRELOAD
Electribe-S
Must have a Smart Media Reader/Writer and a Smart Media card to do a product upgrade. Copy o.s to smart media card. Put Smart Media card into ES1 and power on holding SAMPLE and GLOBAL. When the display indicates end, power down.
Check O.S. Power on holding RECORD and STOP, current o.s. 1.04
--------------------------------------------------------------------------------------------------------------------
Other:
Johnson Millennium Amplifier
INITIALIZE
Powerup W/CONFIG button
* onscreen
Let go
Push MOD
V1.05 most recent
--------------------------------------------------------------------------------------------------------------------
Johnson JM-60
Hold “american model” button
Powerup
Keep holding until LED has 2 lines
Then hold “british model” button
Until PR on screen
Let go
--------------------------------------------------------------------------------------------------------------------
JMP-1
Check ROM: None
Init: None
Preload: Hold "OD1" and "Clean1" while powering up.
--------------------------------------------------------------------------------------------------------------------
JFX1
Check ROM: None
Init: None
Preload: Hold down arrow button and "Store" while powering on.
--------------------------------------------------------------------------------------------------------------------
S3
Poweron w/ STOP + S1
TO RETURN TO THE SITE
CLOSE THIS WINDOWS
POUR REVENIR AU SITE FERMEZ CETTE FENETRE